User`s guide

VigorN65 User’s Guide
20
Scan results will be displayed in the tab of Network, please check if the wireless device
(access point or another computer) with the SSID you wish to connect is shown here.
Scan result includes 5 types of information, they are:
A
The SSID (Service Set Identifier) of wireless device. If nothing is displayed
here, it means the SSID of this wireless device is hidden.
If a
symbol appears in front of the name of wireless device, means
you’ve established connected with that wireless device.
B
The type of this wireless device and the channel number of this wireless
device.

Means this wireless device is an access point

Means this wireless device is a computer (Ad-Hoc mode,
point-to-point connection)
C
The wireless standard supported by this access point is displayed here.
‘n’ for 802.11n
, ‘a’ for 802.11a , ‘g’ for 802.11g , and ‘b’ for
802.11b
.
WPS icon will appear when the access point supports WPS. If the
access point uses encryption, a key icon
will appear.
Note: When the access point supports WPS and WPS icon is appeared,
you will not see the key icon
here even through the access point uses
encryption.
D
Shows the signal strength of access point by percentage.
E
Shows the bar graph of the signal strength.
A
BC D E