User`s guide

Vigor2860 Series User’s Guide
346
Cancel
Cancel the setting configured on this page.
Next
Access into the next setting page.
3. Type the required information and click Next to open next page. You can configure the
settings for SSID1, SSID2, SSID3 and SSID4 respectively.
Available settings are explained as follows:
Item Description
SSID
Active – Click Enable to activate such SSID setting.
SSID – The default name will be displayed. Change the
SSID if it is required. Next, choose LAN-A or LAN-B as
the subnet. If required, you can check the box of Hide
SSID. Then it will not be recognized by wireless station
when the user tries to search the Access Point for
connection.
VLAN – Type the value for such SSID. Packets transferred
from such SSID to LAN will be tagged with the number.
Isolate – From LAN - Check this box to make the wireless
clients (stations) with the same SSID not accessing for
wired PC in LAN.
Isolate – From Member - Check this box to make the