User`s guide

Vigor2860 Series User’s Guide
344
settings.
Profile Name
Display the name of the profile scanned by Vigor router.
Main SSID
Display the SSID used by the Vigor router.
Security
Display the mode used by the Vigor router.
Multi-SSID
Display if the multi-SSID function is enabled or not.
WLAN ACL
Display the access control (None, White List, or Black List)
configured for such profile.
Rate Control
Display if the function of rate control is enabled or not.
Clone
It will pop up a window for you to copy the parameter
settings from a profile to another profile.
Original Profile Name – Display the original profile name
of the selected index.
Select Profile Index – Choose the index number of the
profile that you want to clone from.
Renamed as – When a profile index is selected, the original
name will be displayed in the box first. You can change it
by typing a new name.
Edit
It allows you to modify the detailed settings for each
WLAN profile.
Cancel
It can cancel the settings you just made on this page.
Apply To Device
The WLAN profile can be applied to specified Device (AP
device) if it is required. Simply check the box on the left
side of the WLAN profile you want, and then click the
Apply To Device button. The following dialog box will
appear.
Existing Device – This field will display the access point
connected to Vigor2860 and worked well.
Selected Device – This field will display the access point
which will be applied with the WLAN profile.
Choose one of the devices from the Existing Device and
click
to move it to the right field of Selected Device.