User`s guide

Vigor2860 Series User’s Guide
231
the only channel for VPN connection.
WAN1 Only: Backup WAN2/WAN2 Only: Backup
WAN1 - While connecting, the router will use
WAN1/WAN2 as the only channel for VPN connection. If
WAN1/WAN2 fails, the router will use backup
WAN2/backup WAN1 interface instead.
Always On
Check to enable router always keep VPN connection.
Pre-Shared Key
IKE Authentication Method usually applies to those are
remote dial-in user or node (LAN to LAN) which uses
dynamic IP address and IPSec-related VPN connections
such as L2TP over IPSec and IPSec tunnel.
Pre-Shared Key- Specify a key for IKE authentication.
Confirm Pre-Shared Key-Confirm the pre-shared key.
Digital Signature
(X.509)
Click Digital Signature to invoke this function. Use the
drop down list to choose one of the certificates for using.
You have to configure one certificate at least previously in
Certificate Management >> Local Certificate. Otherwise,
the setting you choose here will not be effective.
Peer ID – Choose the peer ID selection from the drop down
list.
Local ID – Choose Alternative Subject Name First or
Subject Name First.
IPSec Security
Method
Medium - Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option
is active.
High - Encapsulating Security Payload (ESP) means
payload (data) will be encrypted and authenticated. You
may select encryption algorithm from Data Encryption
Standard (DES), Triple DES (3DES), and AES.
User Name
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
The length of the use name is limited to 11 characters.
Password
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
The length of the password is limited to 11 characters.
Remote Network IP
Please type one LAN IP address (according to the real
location of the remote host) for building VPN connection.
Remote Network
Mask
Please type the network mask (according to the real location
of the remote host) for building VPN connection.