User`s guide

Vigor2860 Series User’s Guide
92
QoS Type
Select a proper QoS type for the channel according to the
information that your ISP provides.
PCR
It represents Peak Cell Rate. The default setting is “0”.
SCR
It represents Sustainable Cell Rate. The value of SCR
must be smaller than PCR.
MBS
It represents Maximum Burst Size. The range of the
value is 10 to 50.
After finished the above settings, click OK to save the settings
P
P
o
o
r
r
t
t
-
-
b
b
a
a
s
s
e
e
d
d
B
B
r
r
i
i
d
d
g
g
e
e
General page lets you set the first PVC. As to set the second PVC line, please click the
Port-based Bridge tab to open Bridge configuration page.
Available settings are explained as follows:
Item Description
Enable
Check this box to enable that channel. Only channel 3 to 8
can be set in this page, for channel 1 to 2 are reserved for
NAT using.
P1 to P6
It means the LAN port 1 to 6. Check the box to designate
the LAN port for channel 3 to 8.