User`s guide

VigorAP 800 User’s Guide

simultaneously. Simply choose Mixed (11b+11g+11n) mode.

Enable 2 Subnet

(Simulate 2 APs)

Check the box to enable the function for two independent subnets.

Once you enable this function, LAN-A and LAN-B would be

independent. Next, you can connect one router in LAN-A, and

another router in LAN-B. Such mechanism can make you feeling

that you have two independent AP/subnet functions in one

VigorAP 800.

If you disable this function, LAN-A and LAN-B ports are in the

same domain. You could only connect one router (no matter

connecting to LAN-A or LAN-B) in this environment..

Hide SSID

Check it to prevent from wireless sniffing and make it harder for

unauthorized clients or STAs to join your wireless LAN.

Depending on the wireless utility, the user may only see the

information except SSID or just cannot see any thing about

VigorAP 800 while site surveying. The system allows you to set

three sets of SSID for different usage.

SSID

Set a name for VigorAP 800 to be identified. Default settings are

DrayTek-LAN-A and DrayTek-LAN-B. When Enable 2 Subnet

is enabled, you can specify subnet interface (LAN-A or LAN-B)

for each SSID by using the drop down menu.

Subnet

Choose LAN-A or LAN-B for each SSID.

Isolate Member

Check this box to make the wireless clients (stations) with the

same SSID not accessing for each other.

Mac Clone

Check this box and manually enter the MAC address of the

device with SSID 1. The MAC address of other SSIDs will

change based on this MAC address.

Channel

Means the channel of frequency of the wireless LAN. The default

channel is 6. You may switch channel if the selected channel is

under serious interference. If you have no idea of choosing the

frequency, please select AutoSelect to let system determine for

you.