User`s guide

VigorAP 800 User’s Guide

Phy Mode

There are three types of transmission rates developed by different

techniques for Phy Mode. Data will be transmitted via

communication channel.

Subnet

Choose LAN-A or LAN-B for each SSID.

Security

Select WEP, TKIP or AES as the encryption algorithm.

Peer Mac Address

Four peer MAC addresses are allowed to be entered in this page

at one time.

Packet-OVERDRIVE

This feature can enhance the performance in data transmission

about 40%* more (by checking Tx Burst). It is active only when

both sides of Access Point and Station (in wireless client) invoke

this function at the same time. That is, the wireless client must

support this feature and invoke the function, too.

Note: Vigor N61 wireless adapter supports this function.

Therefore, you can use and install it into your PC for matching

with Packet-OVERDRIVE (refer to the following picture of

Vigor N61 wireless utility window, choose Enable for

TxBURST on the tab of Option).

WMM Capable

To apply WMM parameters for wireless data transmission, please

click the Enable radio button.