User`s guide

VigorAP 800 User’s Guide
43
with Packet-OVERDRIVE (refer to the following picture of
Vigor N61 wireless utility window, choose Enable for
TxBURST on the tab of Option).
WMM Capable
To apply WMM parameters for wireless data transmission, please
click the Enable radio button.
3
3
.
.
5
5
.
.
2
2
A
A
P
P
D
D
i
i
s
s
c
c
o
o
v
v
e
e
r
r
y
y
VigorAP 800 can scan all regulatory channels and find working APs in the neighborhood.
Based on the scanning result, users will know which channel is clean for usage. Also, it can
be used to facilitate finding an AP for a WDS link. Notice that during the scanning process
(about 5 seconds), no client is allowed to connect to VigorAP 800.
This page is used to scan the existence of the APs on the wireless LAN. Yet, only the AP
which is in the same channel of VigorAP 800 can be found. Please click Scan to discover all
the connected APs.
SSID
Display the SSID of the AP scanned by VigorAP 800r.
BSSID
Display the MAC address of the AP scanned by VigorAP
800.
RSSI
Display the signal strength of the access point. RSSI is the
abbreviation of Receive Signal Strength Indication.
Channel
Display the wireless channel used for the AP that is scanned
by VigorAP 800.
Encryption
Display the encryption mode for the scanned AP.