User`s guide

VigorAP 800 User’s Guide

under serious interference. If you have no idea of choosing the

frequency, please select AutoSelect to let system determine for

you.

Rate

If you choose 11g Only, 11b Only or 11n Only, such feature will

be available for you to set data transmission rate.

Phy Mode

Select CCK (11b mode), OFDM (11g mode), or HTMIX (11b/g/n

mixed mode) from the drop down menu for the access point that

VigorAP 800 wants to connect. Each access point should be setup

to the same Phy mode for connecting with each other.

Security

Select WEP, TKIP or AES as the encryption algorithm.

Peer Mac Address

Type the peer MAC address for the access point that VigorAP

800 connects to.

Packet-OVERDRIVE

This feature can enhance the performance in data transmission

about 40%* more (by checking Tx Burst). It is active only when

both sides of Access Point and Station (in wireless client) invoke

this function at the same time. That is, the wireless client must

support this feature and invoke the function, too.

Note: Vigor N61 wireless adapter supports this function.

Therefore, you can use and install it into your PC for matching