User`s guide

VigorAP 800 User’s Guide
40
Status
Display the status of WPS access point.
Refresh
Click this button to refresh the AP site survey.
Start PBC
Click Start PBC to make a WPS connection within 2 minutes.
PIN Start
When using PinCode method, it is required to enter PIN Code
(Personal Identification Number Code, 8-digit numbers) into
Registrar. When the wireless station is Enrollee, the users can use
Renew PIN to re-generate a new PIN code.
Renew PIN
Click this button to re-generate a new PIN code.
Note: When you’re using PBC type WPS setup, you must press PBC button (hardware or
software) of wireless client within 2 minutes. If you didn’t press PBC button of wireless
client within this time period, please press PBC button (hardware or software) of this
access point again.