Operation Manual

VigorBX 2000 Series User’s Guide

Physical Mode Display the physical mode of such interface. If VDSL2 is

detected, this field will display “VDSL2”; if ADSL is

detected, it will display “ADSL”.

DSL Mode Specify the physical mode (VDSL or ADSL) for such router

manually.

Physical Type For such interface, no type can be selected.

DSL Modem Code Choose the correct DSL modem code for ensuring the

network connection.

If you have no idea about the selection, simply choose

Default or contact the dealer for assistance.

Line Speed (Kpbs) If your choose According to Line Speed as the Load Balance

Mode in previous page, please type the line speed for

downloading and uploading for such WAN interface. The unit

is kbps.

VLAN Tag insertion (ADSL)

The settings configured in this field are available for ADSL.

Enable – Enable the function of VLAN with tag.

The router will add specific VLAN number to all packets on

the WAN while sending them out.

Please type the tag value and specify the priority for the

packets sending by WAN1.

Disable – Disable the function of VLAN with tag.

Tag value – Type the value as the VLAN ID number. The range

is form 0 to 4095.

Priority – Type the packet priority number for such VLAN.

The range is from 0 to 7.

VLAN Tag insertion

(VDSL2)

The settings configured in this field are available for VDSL2.