Operation Manual

VigorBX 2000 Series User’s Guide
464
The web user interface will be open until you click the
Logout icon manually.
Enable Validation Code in
Internet/LAN Access
If it is enabled, the mechanism of validation code will be
offered by Vigor router. That is, the client must type
validation code while accessing into Internet or web user
interface of Vigor router.
Internet Access Control Allow management from the Internet - Enable the checkbox
to allow system administrators to login from the Internet.
There are several servers provided by the system to allow
you managing the router from Internet. Check the box(es) to
specify.
Disable PING from the Internet - Check the checkbox to
reject all PING packets from the Internet. For security issue,
this function is enabled by default.
Access List from the
Internet
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
index in IP Object
- Type the index number of the IP object
profile. Related IP with Subnet Mask will appear
automatically.
Management Port Setup User Define Ports - Check to specify user-defined port
numbers for the Telnet, HTTP, HTTPS, FTP, TR-069 and SSH
servers.
Default Ports - Check to use standard port numbers for the
Telnet and HTTP servers.
TLS/SSL Encryption Setup Enable SSL 3.0/1.0/1.1/1.2 – Check the box to enable the
function of SSL 3.0/1.0/1.1/1.2 if required.
Due to security consideration, the built-in HTTPS and SSL
VPN server of the router had upgraded to TLS1.x protocol. If
you are using old browser(eg. IE6.0) or old SmartVPN Client,
you may still need to enable SSL 3.0 to make sure you can
connect, however, it's not recommended.
Device Management Check the box to enable the device management function for
VigorBX 2000.
Respond to external device – If it is enabled, VigorBX 2000
will be regarded as slave device. When the external device
(master device) sends request packet to VigorBX 2000,
VigorBX 2000 would send back information to respond the
request coming from the external device which is able to
manage VigorBX 2000.
After finished the above settings, click OK to save the configuration.