Operation Manual

VigorBX 2000 Series User’s Guide
3
4
I
I
-
-
6
6
-
-
2
2
F
F
o
o
r
r
W
W
A
A
N
N
2
2
(
(
E
E
t
t
h
h
e
e
r
r
n
n
e
e
t
t
)
)
WAN2 is dedicated to physical mode in Ethernet. If you choose WAN2, please specify physical
type. Then, click Next.
Available settings are explained as follows:
Item Description
Display Name Type a name for the router.
VLAN Tag insertion The settings configured in this field are available for WAN1
and WAN2.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN2.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The range
is form 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
On the next page as shown below, please select the appropriate Internet access type
according to the information from your ISP. For example, you should select PPPoE mode if the
ISP provides you PPPoE interface. Then click Next for next step.