Operation Manual

VigorBX 2000 Series User’s Guide
30
9
2. Click any index number (e.g., #1 in this case) to open the following page:
3. Type Sales as the Hunt Group Name and set 100 as the number of the Hunt Group
Extension.
4. Next, configure Labeling on Caller ID. There are three options you can choose.
Disable When Jerry dials 100 (Group Number of Sales) through SIP Trunk, the
calling number display of all of the extensions inside the Hunt Group
will display 8201.
Display
Group Name
When Jerry dials 100 (Group Number of Sales) through SIP Trunk, the
calling number display of all of the extensions inside the Hunt Group
will display Sales.
Display
Group
Extension
When Jerry dials 100 (Group Number of Sales) through SIP Trunk, the
calling number display of all of the extensions inside the Hunt Group
will display 100.
5. After choosing the one you want, click OK to save the settings and exit the web page.
6. Now, the system will apply such function according to your selection to the incoming
calls.