Operation Manual

VigorBX 2000 Series User’s Guide
300
5. Open IP PBX>>PBX System and click Voice Mail/Virtual FAX Configuration.
6. In the following page, enable the virtual FAX function by checking the box of Enable
Virtual FAX. Type the number (e.g., extension number or complete telephone number)
which is going to receive the incoming fax in the field of Extension Number. Type an
email address which is going to receive the incoming fax in the field of Email to (e.g.,
the telephone exchange). Check the box of Forward Fax file by Email. Choose the SMTP
Server (e.g, 1-DrayTek in this case) as the Email Server. Check the box of Prefer WAN
interface and choose WAN2.
Info The extension number configured here must be different with any number
configured in IP PBX>>Extension to avoid the conflict.