Operation Manual

VigorBX 2000 Series User’s Guide
24
7
Registration Interface Choose appropriate interface for the VoIP call; Auto is
recommended.
SIP Local Port Set the port number for receiving SIP message for building a
session. The default value is 5070. Your peer must set the
same value in his/her Registrar.
Domain/Realm Set the domain name or IP address of the SIP Registrar
server.
Proxy Set domain name or IP address of SIP proxy server.
Proxy Port Set port number for the proxy server.
Display Name The caller-ID that you want to be displayed on your friend’s
screen.
Account Number/Name Enter your account name of SIP Address, e.g. every text
before @..
Authentication ID Check the box to invoke this function and enter the name
or number used for SIP Authorization with SIP Registrar. If
this setting value is the same as Account Name, it is not
necessary for you to check the box and set any value in this
field.
Password The password provided to you when you registered with a
SIP service.
Expiry Time It is the time duration that your SIP Registrar server keeps
your registration record. Before the time expires, the
router will send another register request to SIP Registrar
again.
Trunk Number There are two ways to dial outside lines for an extension
number. First, dial a short number and wait for a while.
When dial tone appears, please dial the real outside line
number. Second, dial a short number and then the real
outside line number without waiting for dial tone. The
short number is defined here as Trunk Number.
Out-going call CLI Determine which phone number will be shown to the
remote end.
Main number – Choose this item to display the SIP trunk
number.
Alias number – Choose this item to display the alias phone
number, that is, the sub account.
Answer Mode Office hours - Set the answering mode for such outside line
in office time. You can specify it with Auto Attendant (AA),
or forward it to any Extension or Group directly.
Non-office hours - Set the answering mode for such outside
line in non-office time. You can specify it with Auto
Attendant (AA), or forward it to any Extension or Group
directly.
Holidays - Set the answering mode for such outside line in
holiday. You can specify it with Auto Attendant (AA), or