Operation Manual

VigorBX 2000 Series User’s Guide
226
data transmission via wireless connection. However, if you
have only one antenna attached, please choose 1T1R.
TX Power Set the power percentage for transmission signal of access
point. The greater the value is, the higher intensity of the
signal will be.
WMM Capable WMM is an abbreviation of Wi-Fi Multimedia. It defines the
priority levels for four access categories derived from 802.1d
(prioritization tabs). The categories are designed with
specific types of traffic, voice, video, best effort and low
priority data. There are four accessing categories - AC_BE ,
AC_BK, AC_VI and AC_VO for WMM.
To apply WMM parameters for wireless data transmission,
please click the Enable radio button.
APSD Capable APSD (automatic power-save delivery) is an enhancement
over the power-save mechanisms supported by Wi-Fi
networks. It allows devices to take more time in sleeping
state and consume less power to improve the performance
by minimizing transmission latency.
The default setting is Disable.
Rate Adaptation Algorithm Wireless transmission rate is adapted dynamically. Usually,
performance of “new” algorithm is better than “old”.
Fragment Length
(256 – 2346)
Set the Fragment threshold of wireless radio. Do not modify
default value if you don’t know what it is, default value is
2346.
RTS Threshold (1 – 2347) Minimize the collision (unit is bytes) between hidden stations
to improve wireless performance.
Set the RTS threshold of wireless radio. Do not modify default
value if you don’t know what it is, default value is 2347.
After finishing all the settings here, please click OK to save the configuration.