Operation Manual

VigorBX 2000 Series User’s Guide
16
9
Available settings are explained as follows:
Item Description
Enable Check to enable such function.
Bind Type There are three types of bind type supported.
 Simple Mode – Just simply do the bind authentication
without any search action.
 Anonymous – Perform a search action first with
Anonymous account then do the bind authentication.
 Regular Mode– Mostly it is the same with anonymous
mode. The different is that, the server will firstly check
if you have the search authority.
For the regular mode, you’ll need to type in the Regular DN
and Regular Password.
Server Address Enter the IP address of LDAP server.
Destination Port Type a port number as the destination port for LDAP server.
Use SSL Check the box to use the port number specified for SSL.
Regular DN Type this setting if Regular Mode is selected as Bind Type.
Regular Password Specify a password if Regular Mode is selected as Bind Type.
After finished the above settings, click OK button to save the settings.
P
P
r
r
o
o
f
f
i
i
l
l
e
e
s
s
You can configure eight AD/LDAP profiles. These profiles would be used with User
Management for different purposes in management.
Click any index number link to open the following page.