Operation Manual

VigorBX 2000 Series User’s Guide
15
9
Index Click the number below Index to access into the setting page
of DDNS setup to set account(s).
WAN Interface Display the WAN interface used.
Domain Name Display the domain name that you set on the setting page of
DDNS setup.
Active Display if this account is active or inactive.
3. Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered
hostname: hostname and domain name suffix: dyndns.org in the Domain Name block.
The following two blocks should be typed your account Login Name: test and Password:
test.
Available settings are explained as follows:
Item Description
Enable Dynamic DNS
Account
Check this box to enable the current account. If you did
check the box, you will see a check mark appeared on the
Active column of the previous web page in step 2).
WAN Interface WAN1/WAN2/WAN3/WAN4 First - While connecting, the
router will use WAN1/WAN2/WAN3/WAN4 as the first
channel for such account. If WAN1/WAN2/WAN3 /WAN4
fails, the router will use another WAN interface instead.
WAN1/WAN2/WAN3/WAN4 Only - While connecting, the
router will use WAN1/WAN2/WAN3/WAN4 as the only
channel for such account.
Service Provider Select the service provider for the DDNS account.
Service Type Select a service type (Dynamic, Custom or Static). If you
choose Custom, you can modify the domain that is chosen in
the Domain Name field.
Domain Name Type in one domain name that you applied previously. Use
the drop down list to choose the desired domain.
Login Name Type in the login name that you set for applying domain.
Password Type in the password that you set for applying domain.