Operation Manual

VigorBX 2000 Series User’s Guide
136
Refresh Refresh the ARP table listed below to obtain the newest ARP
table information.
Add or Update
IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to bind
with the assigned IP address.
Comment – Type a brief description for the entry.
Show Comment – Check this box to display the comment on
IP Bind List box.
IP Bind List It displays a list for the IP bind to MAC information.
Add It allows you to add the one you choose from the ARP table or
the IP/MAC address typed in Add and Edit to the table of IP
Bind List.
Update It allows you to edit and modify the selected IP address and
MAC address that you create before.
Delete You can remove any item listed in IP Bind List. Simply click
and select the one, and click Delete. The selected item will
be removed from the IP Bind List.
Backup Store the configuration for Bind IP to MAC as a file.
Restore Restore the previously stored configuration file and apply to
such page.
Info Before you select Strict Bind, you have to bind one set of IP/MAC address for
one PC. If not, no one of the PCs can access into Internet. And the web user
interface of the router might not be accessed.
When you finish the configuration, click OK to save the settings.