Operation Manual

VigorBX 2000 Series User’s Guide
102
TTL value is set by telnet command.
 Ping Interval – Type the interval for the system to
execute the PING operation.
 Ping Retry – Type the number of times that the system is
allowed to execute the PING operation.
After finished the above settings, click OK to save the settings and return to previous page.
A
A
d
d
v
v
a
a
n
n
c
c
e
e
d
d
Such configuration is applied to upstream packets. Such information will be provided by ISP.
Please contact with your ISP for detailed information.
Available settings are explained as follows:
Item Description
QoS Type Select a proper QoS type for the channel according to the
information that your ISP provides.
PCR It represents Peak Cell Rate. The default setting is “0”.
SCR It represents Sustainable Cell Rate. The value of SCR must be
smaller than PCR.
MBS It represents Maximum Burst Size. The range of the value is
10 to 50.
PVC to PVC Binding It allows the enabled PVC channel to use the same ADSL
connection settings of another PVC channel. Please choose
the PVC channel via the drop down list.
After finished the above settings, click OK to save the settings.