Operation Manual

VigorAP 920R Series User’s Guide
77
3
3
.
.
7
7
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
By clicking the General Setup, a new web page will appear so that you could configure
security, Tx Burst and choose proper mode. Please refer to the following figure for more
information.
Available settings are explained as follows:
Item Description
Enable Wireless LAN
Check the box to enable wireless function.
Enable Limit Client
Check the box to set the maximum number of wireless stations
which try to connect Internet through VigorAP. The number
you can set is from 3 to 128.
Enable Limit Client
per SSID
Define the maximum number of wireless stations per SSID
which try to connect to Internet through Vigor device. The
number you can set is from 3 to 128.
Mode
At present, VigorAP 920RP can connect to 11b only, 11n only,
Mixed (11b+11g) and Mixed (11b+11g+11n) stations
simultaneously. Simply choose Mixed (11b+11g+11n) mode.
Channel
Means the channel of frequency of the wireless LAN. You may
switch channel if the selected channel is under serious
interference. If you have no idea of choosing the frequency,