Operation Manual

VigorAP 920R Series User’s Guide
71
Channel
Means the channel of frequency of the wireless LAN. The
default channel is 11. You may switch channel if the selected
channel is under serious interference. If you have no idea of
choosing the frequency, please select AutoSelect to let
system determine for you.
Filtered Out List
Such link will be shown if AutoSelect is selected as Channel.
Click such link to access into Wireless LAN >> Advanced
Settings page.
Extension Channel
With 802.11n, there is one option to double the bandwidth per
channel. The available extension channel options will be
varied according to the Channel selected above.
Rate
If 11b Only is selected as Mode, such feature will be available
to set data transmission rate.
PHY Mode
Data will be transmitted via HTMIX mode.
Each access point should be setup to the same PHY Mode for
connecting with each other.
Security
Select TKIP or AES as the encryption algorithm. Type the key
number if required.
Peer MAC Address
Type the peer MAC address for the access point that VigorAP
920RP connects to.
After finishing this web page configuration, please click OK to save the settings.