Operation Manual

VigorAP 920R Series User’s Guide

It is the simplest way to build connection between wireless network clients and VigorAP

920RP. Users do not need to select any encryption mode and type any long encryption

passphrase to setup a wireless client every time. He/she only needs to press a button on

wireless client, and WPS will connect for client and VigorAP 920RP automatically.

Note: Such function is available for the wireless station with WPS supported.

There are two methods to do network connection through WPS between AP and Stations:

pressing the Start PBC button or using PIN Code.

On the side of VigorAP 920RP series which served as an AP, press WPS button once on the

front panel of VigorAP 920RP or click Start PBC on web configuration interface. On the

side of a station with network card installed, press Start PBC button of network card.

If you want to use PIN code, you have to know the PIN code specified in wireless client.

Then provide the PIN code of the wireless client you wish to connect to the VigorAP 920RP.