Operation Manual

VigorAP 920R Series User’s Guide
32
3
3
.
.
1
1
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
M
M
o
o
d
d
e
e
This page provides several available modes for you to choose for different conditions. Click
any one of them and click OK. The system will configure the required settings
automatically.
Available settings are explained as follows:
Item Description
Wireless LAN(2.4GHz)
AP
This mode allows wireless clients to connect to access point and
exchange data with the devices connected to the wired network.
AP Bridge-Point to
Point
This mode can establish wireless connection with another
VigorAP 920RP using the same mode, and link the wired
network which these two VigorAP 920RPs connected together.
Only one access point can be connected in this mode.
AP Bridge-Point to
Multi-Point
This mode can establish wireless connection with other VigorAP
920RPs using the same mode, and link the wired network which
these VigorAP 920RPs connected together. Up to 4 access
points can be connected in this mode.
AP Bridge-WDS
This mode is similar to AP Bridge to Multi-Point, but access
point is not working in bridge-dedicated mode, and will be able
to accept wireless clients while the access point is working as a
wireless bridge.