Operation Manual

VigorAP 920R Series User’s Guide
28
Use the same SSID
and Security Key as
Above
In general, under the network environment, same SSID and
security key can be used for the host (wireless client) and the
repeater (VigorAP 920RP) in Universal Repeater mode. Check it
to use the same SSID and security key configured as above.
SSID - SSID can be any text numbers or various special
characters. For VigorAP 920RP is set as “Repeater”, the purpose
of the device is to extend the Wi-Fi service. Therefore, the
characters set here will be regarded as “main SSID”. Other
wireless client can receive the wireless signal from
VigorAP920RP by using the SSID configured here.
Security - Set 8~63 ASCII characters or 64 Hexadecimal digits
which can be used for logging into VigorAP 920RP by other
wireless client.
Enable Guest
Wireless
Check the box to enable the guest wireless setting.
SSID – Set a name for VigorAP 920RP. Wireless guest is
allowed to access into Internet via VigorAP 920RP with the
SSID configured here.
Security Key – Set 8~63 ASCII characters or 64 Hexadecimal
digits which can be used for logging into VigorAP 920RP by
wireless guest.
Enable Bandwidth Limit – Check the box to define the
maximum speed of the data uploading/downloading which will
be used for the guest connecting to Vigor device with the same
SSID.
 Upload Limit –Scroll the radio button to choose the
value you want.
 Download Limit –Scroll the radio button to choose
the value you want.
Enable Station Control – Check the box to set the duration for
the guest connecting /reconnecting to Vigor device.
 Connection Time –Scroll the radio button to choose
the value you want.
 Reconnection Time –Scroll the radio button to
choose the value you want.
After finishing this web page configuration, please click Next to continue.