Operation Manual

VigorAP 920R Series User’s Guide

920RP can scan all regulatory channels and find working APs in

the neighborhood.

SSID / MAC Address

(Optional)

SSID means the identification of the wireless LAN. After

choosing one of the AP from AP Discovery window and

clicking OK, the settings (SSID and MAC Address) related to

the selected AP will be displayed on these fields automatically.

Later, VigorAP 920RP will be allowed to access Internet

through the selected AP, by using SSID displayed here.

Channel

Means the channel of frequency of the wireless LAN. The

default channel is 36. You may switch channel if the selected

channel is under serious interference.

Security Mode

There are several modes provided for you to choose. Each mode

will bring up different parameters (e.g., WEP keys, Pass Phrase)

for you to configure.

Encryption Type for

Open/Shared

This option is available when Open/Shared is selected as

Security Mode.

Choose None to disable the WEP Encryption. Data sent to the

AP will not be encrypted. To enable WEP encryption for data

transmission, please choose WEP.

WEP Keys - Four keys can be entered here, but only one key

can be selected at a time. The format of WEP Key is restricted to

5 ASCII characters or 10 hexadecimal values in 64-bit

encryption level, or restricted to 13 ASCII characters or 26

hexadecimal values in 128-bit encryption level. The allowed

content is the ASCII characters from 33(!) to 126(~) except '#'

and ','.

Encryption Type for

WPA/PSK and

WPA2/PSK

This option is available when WPA/PSK or WPA2/PSK is

selected as Security Mode.

Select TKIP or AES as the algorithm for WPA.

Security Key

Type 8~63 ASCII characters, such as 012345678..(or 64

Hexadecimal digits leading by 0x, such as "0x321253abcde...").

Such feature is available for WPA/PSK or WPA2/PSK mode.