Operation Manual

VigorAP 920R Series User’s Guide
180
3
3
.
.
1
1
2
2
.
.
4
4
S
S
e
e
n
n
s
s
o
o
r
r
With built-in temperature and humidity sensor, VigorAP 920 will monitor temperature
around the device and send alert message to notify the system administrator by Syslog or
e-mail.
S
S
e
e
n
n
s
s
o
o
r
r
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
Available settings are explained as follows:
Item Description
Enable “Sensor Graph”
To display a graph for the connected sensor, check the
box.
Alerts
It can determine the time/interval to send an alert
message.
Once – An alert will be sent out once when the sensor
value is outside the range defined in Alert Criteria.
Per min. – Alert message will be sent out per minute
when the sensor value is outside the range defined in Alert
Criteria.
Alert Method
Syslog - The humidity log containing the alarm message
will be recorded on Syslog if it is enabled.
Mail - The humidity log containing the alarm message
will be sent by mail.
Alert Criteria
Alert message will be sent out according to the rules
specified in this field.
Inside case – The temperature reading is obtained just
from the data recorded inside the chip of VigorAP.
2.4GHz Wi-Fi – The temperature reading for 2.4G Wi-Fi
network operation is estimated by using 2.4GHz CPU
Wi-Fi module.
The built-in sensor of VigorAP contains temperature
sensor and humidity sensor. Please type the upper limit
and lower limit for VigorAP system to send out