Operation Manual

VigorAP 920R Series User’s Guide
152
you can set is from 3 to 128.
Enable Limit Client
per SSID
Define the maximum number of wireless stations per SSID
which try to connect to Internet through Vigor device. The
number you can set is from 3 to 128.
Mode
At present, VigorAP 920RP can connect to 11a only, 11n only,
Mixed (11a+11n) and Mixed (11a+11n+11ac).
Channel
Means the channel of frequency of the wireless LAN. You may
switch channel if the selected channel is under serious
interference. If you have no idea of choosing the frequency,
please select AutoSelect to let system determine for you.
Filtered Out List
Such link will be shown if AutoSelect is selected as Channel.
Click such link to access into Wireless LAN >> Advanced
Settings page.
Hide SSID
Check it to prevent from wireless sniffing and make it harder
for unauthorized clients or STAs to join your wireless LAN.
Depending on the wireless utility, the user may only see the
information except SSID or just cannot see any thing about
VigorAP 920RP while site surveying. The system allows you
to set four sets of SSID for different usage.
SSID
Set a name for VigorAP 920RP to be identified.
Isolate Member
Check this box to make the wireless clients (stations) with the
same SSID not accessing for each other.
VLAN ID
Type the value for such SSID. Packets transferred from such
SSID to LAN will be tagged with the number.
If your network uses VLANs, you can assign the SSID to a
VLAN on your network. Client devices that associate using the
SSID are grouped into this VLAN. The VLAN ID range is
from 3 to 4095. The VLAN ID is 0 by default, it means
disabling the VLAN function for the SSID.
After finishing this web page configuration, please click OK to save the settings.