Operation Manual

VigorAP 920R Series User’s Guide
2
1
1
.
.
2
2
L
L
E
E
D
D
I
I
n
n
d
d
i
i
c
c
a
a
t
t
o
o
r
r
s
s
a
a
n
n
d
d
C
C
o
o
n
n
n
n
e
e
c
c
t
t
o
o
r
r
s
s
Before you use the Vigor modem, please get acquainted with the LED indicators and
connectors first.
AP920RP AP920R
LED Status Explanation
Off The system is not ready or has failed. ACT
Blinking The system is ready.
On Wireless function is ready.
Off Wireless function is not ready.
2.4G / 5G
Blinking Data is being transmitted (sending/receiving).
Interface Description
Factory Reset Restore the default settings. Usage: Switch on the access point. Press and hold
reset button for at least 10 seconds. The router will restart with the factory
default configuration.
Before pressing the button, the cover should first be removed by rotating it with
a torque of 13 kgf-cm. After the access point has been reset, replace the cover
and lock it with the same amount of torque.
Port PoE In
/ PoE In
Connector for receiving power from another device.
Port PoE Out
(for AP920RP)
Connector for supplying power to another device.
Note: For the sake of safety, keep the access point away from children