Operation Manual

VigorAP 910C User’s Guide
41
 Start IP Address - Enter a value of the IP address pool for
the
DHCP server to start with when issuing IP addresses. If
the 1st
IP address of your modem is 192.168.1.2, the
starting IP address
must be 192.168.1.3 or greater, but
smaller than 192.168.1.254.
 End IP Address - Enter a value of the IP address pool for
the
DHCP server to end with when issuing IP addresses.
 Subnet Mask - Type in an address code that determines the
size of the network. (Default: 255.255.255.0/ 24)
 Default Gateway - Enter a value of the gateway IP address
for
the DHCP server.
 Lease Time - It allows you to set the leased time for the
specified PC.
 Primary DNS Server - You must specify a DNS server IP
address here because your ISP should provide you with
usually
more than one DNS Server. If your ISP does not
provide it, the
modem will automatically apply default DNS
Server IP address:
194.109.6.66 to this field.
 Secondary DNS Server - You can specify secondary DNS
server
IP address here because your ISP often provides you
more than
one DNS Server. If your ISP does not provide it,
the modem will
automatically apply default secondary DNS
Server IP address: 194.98.0.1 to this field.
Disable Server - Disable Server lets you manually use other
DHCP server to
assign IP address to every host in the LAN.
 Trust DHCP Server IP for WLAN - When the built-in
DHCP server of VigorAP is disabled, the wireless client
might get IP address from other DHCP server. Sometimes,
it might cause wireless client obtaining wrong IP or unable
to access internet. To solve this problem, simply specify a
DHCP server in this field. Then, the wireless client
connecting to such VigorAP will get IP address from this
specified DHCP server only.
Relay Agent - Specify which subnet that DHCP server is located
the relay agent should redirect the DHCP request to.
 DHCP Relay Agent - It is available
when Enable Relay
Agent is selected. Set the IP address of the
DHCP server
you are going to use so the Relay Agent can help
to forward
the DHCP request to the DHCP server.
DNS Server IP
Address
Set the DNS server IP address for VigorAP.
 Primary IP Address- You must specify a DNS server IP
address here because your ISP should provide you with
usually
more than one DNS Server. If your ISP does not
provide it, the
modem will automatically apply default DNS
Server IP address:
194.109.6.66 to this field.

Secondary IP Address- You can specify secondary
DNS server IP address here because your ISP often
provides you more than one DNS Server. If your ISP