Operation Manual

VigorAP 910C User’s Guide

Available settings are explained as follows:

Item Description

LAN IP Network

Configuration

Enable DHCP Client – When it is enabled, VigorAP 910C will

be treated as a client and can be managed / controlled by AP

Management server offered by Vigor router (e.g., Vigor2860).

IP Address – Type in private IP address for connecting to a local

private network (Default: 192.168.1.2).

Subnet Mask – Type in an address code that determines the size

of the network. (Default: 255.255.255.0/ 24)

Default Gateway - In general, it is not really necessary to

specify a gateway for VigorAP 902. However, if it is required,

simply type an IP address as the gateway for VigorAP 902. It

will be convenient for the access point to acquire more service

(e.g., accessing NTP server) from Vigor router.

Enable Management VLAN – VigorAP 910C supports

tag-based

VLAN for wireless clients accessing Vigor device. Only the

clients with the specified VLAN ID can access into VigorAP

910C.

 VLAN ID – Type the number as VLAN ID tagged on the

transmitted packet. “0” means no VALN tag.

DHCP Server

Configuration

DHCP stands for Dynamic Host Configuration Protocol. DHCP

server can automatically dispatch related IP settings to any local

user configured as a DHCP client.

Enable Server – When it is enabled, VigorAP

will

assign

required information (e.g., IP address, DNS server) to every host

in LAN.