Operation Manual

VigorAP 910C User’s Guide

Encryption Type for

Open/Shared

This option is available when Open/Shared is selected as

Security Mode.

Choose None to disable the WEP Encryption. Data sent to the

AP will not be encrypted. To enable WEP encryption for data

transmission, please choose WEP.

WEP Keys - Four keys can be entered here, but only one key

can be selected at a time. The format of WEP Key is restricted to

5 ASCII characters or 10 hexadecimal values in 64-bit

encryption level, or restricted to 13 ASCII characters or 26

hexadecimal values in 128-bit encryption level. The allowed

content is the ASCII characters from 33(!) to 126(~) except '#'

and ','.

Encryption Type for

WPA/PSK and

WPA2/PSK

This option is available when WPA/PSK or WPA2/PSK is

selected as Security Mode.

Select TKIP or AES as the algorithm for WPA.

Security Key

Type 8~63 ASCII characters, such as 012345678..(or 64

Hexadecimal digits leading by 0x, such as "0x321253abcde...").

Such feature is available for WPA/PSK or WPA2/PSK mode.

Use the same SSID

and Security Key as

Above

In general, under the network environment, same SSID and

security key can be used for the host (wireless client) and the

repeater (VigorAP 910C) in Universal Repeater mode. Check it

to use the same SSID and security key configured as above.

SSID - SSID can be any text numbers or various special

characters. For VigorAP 910C is set as “Repeater”, the purpose

of the device is to extend the Wi-Fi service. Therefore, the

characters set here will be regarded as “main SSID”. Other

wireless client can receive the wireless signal from VigorAP

910C by using the SSID configured here.

Security Key - Set 8~63 ASCII characters or 64 Hexadecimal

digits which can be used for logging into VigorAP 910C by

other wireless client.

Enable Guest

Check the box to enable the guest wireless setting.