Operation Manual

VigorAP 910C User’s Guide
235
3
3
.
.
1
1
6
6
.
.
7
7
S
S
N
N
M
M
P
P
This page allows you to configure settings for SNMP and SNMPV3 services.
The SNMPv3 is more secure than SNMP through the authentication method (support MD5)
for the management needs.
Available parameters are explained as follows:
Item Description
Enable SNMP Agent
Check it to enable this function.
Enable SNMPV3 Agent
Check it to enable this function.
USM User
USM means user-based security mode.
Type a username which will be used for authentication. The
maximum length of the text is limited to 23 characters.
Auth Algorithm
Choose one of the encryption methods listed below as the
authentication algorithm.
Auth Password
Type a password for authentication. The maximum length of
the text is limited to 23 characters.