Operation Manual

VigorAP 910C User’s Guide
217
Click Create Root CA to open the following page. Type in all the information that the
window request such as certifcate name (used for identifying different certificate), subject
alternative name type and relational settings for subject name.
Click Create Root CA to open the following page. Type or choose all the information that
the window request such as subject name, key type, key size and so on.
Available settings are explained as follows:
Item Description
Subject Name
Type the required information for creating a root CA.
Country (C) – Type the country code (two characters) in this
box.
State (S)/ Location (L)/ Organization (O)/ Organization Unit
(OU) /Common Name (CN) - Type the name or information for
the root CA with length less than 32 characters.
Email(E) – Type the email address for the root CA with length
less than 32 characters.
Key Type
At present, only RSA (an encryption algorithm) is supported by
such device.
Key Size
To determine the size of a key to be authenticated, use the drop
down list to specify the one you need.
Apply to Web
HTTPS
VigorAP needs a certificate to access into Internet via Web
HTTPS.