Operation Manual

VigorAP 910C User’s Guide
136
encryption level, or restricted to 13 ASCII characters or 26
hexadecimal values in 128-bit encryption level. The allowed
content is the ASCII characters from 33(!) to 126(~) except '#'
and ','.
Encryption Type for
WPA/PSK and
WPA2/PSK
This option is available when WPA/PSK or WPA2/PSK is
selected as Security Mode.
Select TKIP or AES as the algorithm for WPA.
Pass Phrase
Either 8~63 ASCII characters, such as 012345678 (or 64
Hexadecimal digits leading by 0x, such as "0x321253abcde...").
Universal Repeater IP Configuration
Connection Type
Choose DHCP or Static IP as the connection mode.
DHCP – The wireless station will be assigned with an IP from
VigorAP.
Static IP – The wireless station shall specify a static IP for
connecting to Internet via VigorAP.
Device Name
This setting is available when DHCP is selected as
Connection Type.
Type a name for the router as identification. Simply use the
default name.
IP Address
This setting is available when Static IP is selected as
Connection Type.
Type an IP address with the same network segment of the LAN
IP setting of the router. Such IP shall be different with any IP
address in LAN.
Subnet Mask
This setting is available when Static IP is selected as
Connection Type.
Type the subnet mask setting which shall be the same as the
one configured in LAN for the router.
Default Gateway
This setting is available when Static IP is selected as
Connection Type.
Type the gateway setting which shall be the same as the default
gateway configured in LAN for the router.
After finishing this web page configuration, please click OK to save the settings.