Operation Manual

VigorAP 910C User’s Guide
135
Available settings are explained as follows:
Item Description
Universal Repeater Parameters
SSID
Set the name of access point that VigorAP 910C wants to
connect to.
MAC Address
(Optional)
Type the MAC address of access point that VigorAP 910C wants
to connect to.
Channel
Means the channel of frequency of the wireless LAN. The
default channel is 11. You may switch channel if the selected
channel is under serious interference. If you have no idea of
choosing the frequency, please select AutoSelect to let system
determine for you.
Security Mode
There are several modes provided for you to choose. Each mode
will bring up different parameters (e.g., WEP keys, Pass Phrase)
for you to configure.
Encryption Type for
Open/Shared
This option is available when Open/Shared is selected as
Security Mode.
Choose None to disable the WEP Encryption. Data sent to the
AP will not be encrypted. To enable WEP encryption for data
transmission, please choose WEP.
WEP Keys - Four keys can be entered here, but only one key
can be selected at a time. The format of WEP Key is restricted to
5 ASCII characters or 10 hexadecimal values in 64-bit