Manualshelf

Operation Manual

ManualsBrandsDraytek ManualsWiFiVigor AP 910C
111112113114115116117118119120
VigorAP 910C User’s Guide
105
5GHz bands
using 2.4GHz band is unable to connect to the wireless client
with 5GHz band, and vice versa.
For WLAN 2.4GHz and 5GHz set with the same SSID name:
No matter such function is enabled or disabled, clients
using WLAN 2.4GHz and 5GHz can communicate for
each other if Isolate Member (in Wireless
LAN>>General Setup) is NOT enabled for such SSID.
Yet, if the function of Isolate Member (in Wireless
LAN>>General Setup) is enabled for such SSID, clients
using WLAN 2.4GHz and 5GHz will be unable to
communicate with each other.
Isolate members with
IP
The default setting is “Disable”.
If it is enabled, VigorAP will isolate different wireless clients
according to their IP address (es).
MAC Clone
Click Enable and manually enter the MAC address of the device
with SSID 1. The MAC address of other SSIDs will change
based on this MAC address.