Operation Manual

VigorAP 910C User’s Guide

the same manner as broadcast traffic.

Isolate 2.4GHz and

5GHz bands

The default setting is “Enable”. It means that the wireless

client using 2.4GHz band is unable to connect to the wireless

client with 5GHz band, and vice versa.

For WLAN 2.4GHz and 5GHz set with the same SSID name:

 No matter such function is enabled or disabled, clients

using WLAN 2.4GHz and 5GHz can communicate for

each other if Isolate Member (in Wireless

LAN>>General Setup) is NOT enabled for such SSID.

 Yet, if the function of Isolate Member (in Wireless

LAN>>General Setup) is enabled for such SSID, clients

using WLAN 2.4GHz and 5GHz will be unable to

communicate with each other.

Isolate members with

The default setting is “Disable”.

If it is enabled, VigorAP will isolate different wireless clients

according to their IP address(es).

MAC Clone

Click Enable and manually enter the MAC address of the

device with SSID 1. The MAC address of other SSIDs will

change based on this MAC address.