Operation Manual

VigorAP 902 User’s Guide
132
3
3
.
.
9
9
.
.
7
7
U
U
n
n
i
i
v
v
e
e
r
r
s
s
a
a
l
l
R
R
e
e
p
p
e
e
a
a
t
t
e
e
r
r
The access point can act as a wireless repeater; it can be Station and AP at the same time. It
can use Station function to connect to a Root AP and use AP function to serve all wireless
stations within its coverage.
Note: While using Universal Repeater mode, the access point will demodulate the
received signal. Please check if this signal is noise for the operating network, then have
the signal modulated and amplified again. The output power of this mode is the same as
that of WDS and normal AP mode.
Available settings are explained as follows:
Item Description
Universal Repeater Parameters
SSID
Set the name of access point that VigorAP 902 wants to
connect to.
MAC Address
(Optional)
Type the MAC address of access point that VigorAP 902 wants
to connect to.
Channel
Means the channel of frequency of the wireless LAN. The
default channel is 11. You may switch channel if the selected
channel is under serious interference. If you have no idea of
choosing the frequency, please select AutoSelect to let system
determine for you.
Security Mode
There are several modes provided for you to choose. Each
mode will bring up different parameters (e.g., WEP keys, Pass
Phrase) for you to configure.