Operation Manual

VigorAP 902 User’s Guide
4
Interface Description
0/1 Power switch.
PWR: Connecter for a power adapter.
LAN B Connecter for xDSL / Cable modem (Giga level)
or router.
LAN A4, A2,
A1
A3 (PoE)
Connecter for xDSL / Cable modem (Giga level) /
computer or router.
LAN A3 is used for PoE connection (for indoor
use).
WLAN
ON/OFF WPS
Wireless band will be switched /changed
according to the button pressed and released. For
example,
 2.4G (On) and 5G (On) – in default.
 2.4G (Off) and 5G (On) – pressed and released
the button once.
 2.4G (On) and 5G (Off) – pressed and released
the button twice.
 2.4G (Off) and 5G (Off) – pressed and released
the button three times.
WPS - When WPS function is enabled by web
user interface, press this button for more than 2
seconds. The router will wait for any wireless
client connecting to it through WPS.
USB
Connecter for a USB device (for temperature
sensor).
Restore the default settings. Usage: Turn on
VigorAP 902. Press the button and keep for more
than 10 seconds. Then the device will restart with
the factory default configuration.
Note: For the sake of security, make the accessory kit away from children.