Operation Manual

VigorAP 902 User’s Guide
102
Each item is explained as follows:
Item Description
Enable AP Monitor
Mode
This function can help to get and keep the records of APs
detected by such device after clicking Scan.
In general, only the available AP will be detected by Vigor
device. Once the AP is unavailable, it will be deleted from the
Access Point List immediately. However, if such function is
enabled, the system will keep the record of the AP (once
detected by Vigor device) until it is available for Vigor device
again.
SSID
Display the SSID of the AP scanned by VigorAP 902.
BSSID
Display the MAC address of the AP scanned by VigorAP 902.
RSSI
Display the signal strength of the access point. RSSI is the
abbreviation of Received Signal Strength Indication.
Channel
Display the wireless channel used for the AP that is scanned by
VigorAP 902.
Encryption
Display the encryption mode for the scanned AP.
Authentication
Display the authentication type that the scanned AP applied.
Mode
Display the wireless connection mode that the scanned AP
used.
Ch. Width
Display the channel width that the scanned AP used.
Scan
It is used to discover all the connected AP. The results will be
shown on the box above this button
Channel Statistics
It displays the statistics for the channels used by APs.
AP’s MAC Address
If you want the found AP applying the WDS settings, please