Operation Manual

VigorAP 810 User’s Guide
80
VLAN ID
Type the value for such SSID. Packets transferred from such
SSID to LAN will be tagged with the number.
If your network uses VLANs, you can assign the SSID to a
VLAN on your network. Client devices that associate using the
SSID are grouped into this VLAN. The VLAN ID range is
from 3 to 4095. The VLAN ID is 0 by default, it means
disabling the VLAN function for the SSID.
PHY Mode
Data will be transmitted via HTMIX mode.
Each access point should be setup to the same PHY Mode for
connecting with each other.
Subnet
Choose LAN-A or LAN-B for each SSID.
Security
Select WEP, TKIP or AES as the encryption algorithm.
Peer MAC Address
Four peer MAC addresses are allowed to be entered in this
page at one time.
After finishing this web page configuration, please click OK to save the settings.