Operation Manual

VigorAP 810 User’s Guide
31
server IP address here because your ISP often provides you
more than one DNS Server. If your ISP does not provide it,
the modem will automatically apply default secondary
DNS Server IP address: 194.98.0.1 to this field.
Relay Agent - Specify which subnet that DHCP server is located
the relay agent should redirect the DHCP request to.
 DHCP Server IP Address for Relay Agent - It is available
when Enable Relay Agent is selected. Set the IP address of
the DHCP server you are going to use so the Relay Agent
can help to forward the DHCP request to the DHCP server.
 Primary DNS Server - You must specify a DNS server IP
address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
provide it, the modem will automatically apply default
DNS Server IP address: 194.109.6.66 to this field.
 Secondary DNS Server - You can specify secondary DNS
server IP address here because your ISP often provides you
more than one DNS Server. If your ISP does not provide it,
the modem will automatically apply default secondary
DNS Server IP address: 194.98.0.1 to this field.
Disable Server - Disable Server lets you manually or use other
DHCP server to assign IP address to every host in the LAN.
 Primary DNS Server - You must specify a DNS server IP
address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
provide it, the modem will automatically apply default
DNS Server IP address: 194.109.6.66 to this field.
 Secondary DNS Server - You can specify secondary DNS
server IP address here because your ISP often provides you
more than one DNS Server. If your ISP does not provide it,
the modem will automatically apply default secondary
DNS Server IP address: 194.98.0.1 to this field.
 Trust DHCP Server IP for WLAN –There is no right for
such VigorAP to assign IP address for wireless LAN user.
However, you can specify another valid DHCP server on
other VigorAP to make the wireless LAN client obtaining
the IP address from the designated DHCP server.
Specify a DHCP server in such field. All the IP addresses
of the devices on LAN of VigorAP will be assigned via
such specified server. It is used to avoid IP assignment
interference due to multiple DHCP servers in one LAN.
After finishing this web page configuration, please click OK to save the settings.