Operation Manual

VigorAP 810 User’s Guide
142
2. Click Browse button to choose the correct configuration file for uploading to the
modem.
3. Click Restore button and wait for few seconds, the system will tell you that the
restoration procedure is successful.
3
3
.
.
1
1
3
3
.
.
5
5
S
S
y
y
s
s
l
l
o
o
g
g
/
/
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
Syslog function is provided for users to monitor router.
Available parameters are explained as follows:
Item Description
SysLog Access Setup
Enable - Check Enable to activate function of Syslog.
Server IP Address -The IP address of the Syslog server.
Destination Port - Assign a port for the Syslog protocol.
Log Level – Specify log type on this web page to send the
corresponding message of info, warning, error or all.
Mail Alert Setup
Check Enable to activate function of mail alert.
SMTP Server - The IP address of the SMTP server.
Mail To - Assign a mail address for sending mails out.
Mail From - Assign a path for receiving the mail from
outside.
User Name - Type the user name for authentication.
Password - Type the password for authentication.
Use TLS – Check this box to encrypt alert mail. However, if
the SMTP server specified here does not support TLS
protocol, the alert mail with encrypted data will not be
received by the receiver.