Operation Manual

VigorAP 810 User’s Guide
137
3
3
.
.
1
1
3
3
.
.
2
2
T
T
R
R
-
-
0
0
6
6
9
9
This device supports TR-069 standard. It is very convenient for an administrator to manage a
TR-069 device through an
Auto Configuration Server, e.g., VigorACS.
Available settings are explained as follows:
Item Description
ACS Settings
URL/Username/Password – Such data must be typed according
to the ACS (Auto Configuration Server) you want to link. Please
refer to Auto Configuration Server user’s manual for detailed
information.
Wizard – Click it to enter the IP address of VigorACS server,
port number and the handler.
Test With Inform – Click it to send a message based on the
event code selection to test if such CPE is able to communicate
with VigorACS SI server.
Event Code – Use the drop down menu to specify an event to
perform the test.
Last Inform Response Time – Display the time that VigorACS
server made a response while receiving Inform message from
CPE last time.
CPE Settings
Such information is useful for Auto Configuration Server (ACS).
Enable– Check the box to allow the CPE Client to connect with
Auto Configuration Server.
SSL(HTTPS) Mode - Check the box to allow the CPE client to
connect with ACS through SSL.