Operation Manual

VigorAP 810 User’s Guide
100
3
3
.
.
9
9
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
By clicking the General Setup, a new web page will appear so that you could configure the
SSID and the wireless channel.
Please refer to the following figure for more information.
Available settings are explained as follows:
Item Description
Enable Wireless LAN
Check the box to enable wireless function.
Enable Client Limit
Check the box to set the maximum number of wireless stations
which try to connect Internet through Vigor AP. The number
you can set is from 3 to 64.
Enable Client Limit
per SSID
Define the maximum number of wireless stations per SSID
which try to connect to Internet through Vigor device. The
number you can set is from 3 to 64.
Mode
At present, VigorAP 810 can connect to 11b only, 11g only, 11n
only, Mixed (11b+11g), Mixed (11g+11n) and Mixed
(11b+11g+11n) stations simultaneously. Simply choose Mixed
(11b+11g+11n) mode.
Channel
Means the channel of frequency of the wireless LAN. You may
switch channel if the selected channel is under serious