Operation Manual

VigorAP 710 User’s Guide
81
over) is detected by VigorAP 710, VigorAP 710 will terminate
the network connection for that wireless station. Later, the
wireless station can connect to the adjacent AP (with better
RSSI).
 With Adjacent AP RSSI over – Specify a value as a
threshold.
Fast Roaming
(WPA/802.1x)
Enable – Check the box to enable fast roaming configuration.
PMK Caching: Cache Period - Set the expire time of WPA2
PMK (Pairwise master key) cache. PMK Cache manages the list
from the BSSIDs in the associated SSID with which it has
pre-authenticated. Such feature is available for WPA2/802.1
mode.
Pre-Authentication - Enables a station to authenticate to
multiple APs for roaming securer and faster. With the
pre-authentication procedure defined in IEEE 802.11i
specification, the pre-four-way-handshake can reduce handoff
delay perceivable by a mobile node. It makes roaming faster and
more secure. (Only valid in WPA2)
Enable - Enable IEEE 802.1X Pre-Authentication.
Disable - Disable IEEE 802.1X Pre-Authentication.
After finishing this web page configuration, please click OK to save the settings.
3
3
.
.
7
7
.
.
1
1
3
3
S
S
t
t
a
a
t
t
i
i
o
o
n
n
L
L
i
i
s
s
t
t
Station List provides the knowledge of connecting wireless clients now along with its status
code. Each tab (general, advanced, control, neighbor) will display different status
information (including MAC address, Vendor, SSID, Auth, Encrypt, Tx/Rx Rate, Hostname,
RSSI, Link Speed, BW, PSM, WMM, PHMd, MCS, Connection Time, Reconnection Time,
Approx. Distance, Visit Time, and so on).
Available settings are explained as follows: