Operation Manual

VigorAP 710 User’s Guide

Channel

Means the channel of frequency of the wireless LAN. You may

switch channel if the selected channel is under serious

interference. If you have no idea of choosing the frequency,

please select AutoSelect to let system determine for you.

Extension Channel

With 802.11n, there is one option to double the bandwidth per

channel. The available extension channel options will be varied

according to the Channel selected above. Configure the

extension channel you want.

Enable

SSID #1 is enabled in default. SSID #2 ~ #4 can be enabled

manually.

Hide SSID

Check it to prevent from wireless sniffing and make it harder for

unauthorized clients or STAs to join your wireless LAN.

Depending on the wireless utility, the user may only see the

information except SSID or just cannot see any thing about

VigorAP 710 while site surveying. The system allows you to set

three sets of SSID for different usage.

SSID

Set a name for VigorAP 710 to be identified. Default setting is

DrayTek.

Isolate LAN

Check this box to make the wireless clients (stations) with the

same SSID not accessing for wired PC in LAN.

Isolate Member

Check this box to make the wireless clients (stations) with the

same SSID not accessing for each other.

VLAN ID

Type the value for such SSID. Packets transferred from such

SSID to LAN will be tagged with the number.

If your network uses VLANs, you can assign the SSID to a

VLAN on your network. Client devices that associate using the

SSID are grouped into this VLAN. The VLAN ID range is from

3 to 4095. The VLAN ID is 0 by default, it means disabling the

VLAN function for the SSID.