Operation Manual

VigorAP 710 User’s Guide

SSID

Set a name for VigorAP 710 to be identified. Default settings

are DrayTek.

Isolate Member

Check this box to make the wireless clients (stations) with the

same SSID not accessing for each other.

VLAN ID

Type the value for such SSID. Packets transferred from such

SSID to LAN will be tagged with the number.

If your network uses VLANs, you can assign the SSID to a

VLAN on your network. Client devices that associate using the

SSID are grouped into this VLAN. The VLAN ID range is

from 3 to 4095. The VLAN ID is 0 by default, it means

disabling the VLAN function for the SSID.

After finishing this web page configuration, please click OK to save the settings.